Milan
TONNEAU
Automatic two-hand watch with tonneau-shaped case, green dial, and choice of strap.
Flexible payment options available at checkout.
Free Shipping
5 Year Guarantee
30 Day Returns
- Case size: 35mm x 45mm x 10.6mm
- Case Material: 316L high-grade stainless steel
- Water Resistance: 100M / 10 ATM
- Movement: Swiss Made Sellita SW300-1 Special Elaborated Grade movement, modified to remove the seconds hand. Decorated with a bespoke rotor that is vapour coated to exactly match the dial colour.
- Power Reserve: Approximately 56 hours when fully wound
Short 14cm - 17.5cm wrist
Regular 16cm - 22cm wrist
Long 18cm - 24cm wrist
Milan
MILAN
€1,295.00
Short Lion Tan Granolo Leather Strap
Short Pilot Blue Granolo Leather StrapLion Tan Granolo Leather StrapPilot Blue Granolo Leather Strap
Gull Grey Granolo Leather Strap
Black Granolo Leather Strap
Tan St. Venere Leather Strap
Black St. Venere Leather Strap
Agave Green St. Venere Leather Strap
Navy St. Venere Leather Strap
Grey Suede Leather Strap
Brown Suede Leather Strap
Green Suede Leather Strap
Green Rubber Strap
Black Rubber Strap
Milanese Bracelet
GREEN-LIT
The Milan draws its inspiration from a surprising source, that of green-glazed ceramics. Green pottery has been produced across the world for millennia, from medieval Britain to ancient China, with rich hues that evoke those found in nature. The Milan looks to capture the magic of this timeless colour, and so its vibrant dial is what takes centre stage. It’s a rich emerald green, with a mesmerizing pattern of concentric ridges. The dial has then been lacquered, to add richness to the surface and enhance the various green tones. The end result is a gamut of green shades that follow the lighter highlights and deeper hues seen in those historic ceramics. Set against this lustrous backdrop are polished silver batons and Arabic markers. These have a rounded top so that they catch the light from every angle, and they’re paired with a clean polished baton handset.
Features
Curved Crystal - The sapphire crystal is curved to match the shape of the case and features a bevelled edge to provide some subtle detailing. To improve legibility, the underside has been given an anti-reflective coating.
Curved Case - The steel case has a curved top that flows with your wrist, while the case sides are engraved with an outline emphasising the sleek shape. What’s more, the case is remarkably slim, measuring just 7.2mm across the curve, and 10.6mm in total.
Clean Lines - As well as being curved to the shape of the wrist, the tonneau case has a polished chamfered edge that tapers away at the underside.
Premium movement - Inside the watch ticks a premium Sellita SW300-1 Automatic movement. This calibre has 25 jewels, a beat rate of 28,800 vibrations per hour (4 Hz), and a 56-hour power reserve.
Vapour Coated Rotor - In a first for Farer, the movement’s winding rotor has been vapour coated to match the dial colour.
STORY
The Milan is inspired by the classic two-hand cushion-cased watches of the 1970s. These watches were notable for putting a spin on traditional two-hand watches through the use of unique cases shapes, dial textures and colours. The Milan looks to continue this tradition and is of course named after the famous Italian city. The reason for this is because firstly it aims to embody the spirit of the city during that era, and the name is also a nod to the fact that the dial was inspired by Italian green-glazed ceramics.
tech specs
Dimensions
| Diameter | 35mm |
| Depth | 10.6mm |
| Lug-to-Lug | 45mm |
| Pin-to-Pin | 41mm |
| Lug Width | 20mm |
Case Material
316L high-grade stainless steel
Case Finish
Brushed with polished chamfers
Glass
Curved sapphire crystal with a bevelled edge, and multi-layer anti-reflective coating on the underside. Sapphire exhibition glass on rear.
Dial
Green lacquer dial with a pattern of three-dimensional concentric ridges, with applied polished Arabic and baton numerals with a rounded surface.
Hands
Polished silver baton handset
Crown
Rounded stainless steel inset with solid bronze cap featuring embossed Farer 'A'
Strap
St Venere leather strap with 316L stainless steel buckle fastening
Water Resistance
100M / 10 ATM
Movement
Movement
Swiss Made Sellita SW300-1 Special Elaborated Grade movement, modified to remove the seconds hand. Decorated with a bespoke rotor that is vapour coated to exactly match the dial colour.
Vibrations
28,800 vibrations per hour (4 Hz)
Functions
Hours, minutes
Winding
Automatic
Jewels
25
Power Reserve
Approximately 56 hours when fully wound
fitting
Wrist circumference of 6.9 inches - 17.5cm
Wrist circumference of 7 inches - 18cm
Wrist circumference of 6.9 inches - 17.5cm
